Galvanized Corrosion Resistance Fence Welded Wire Mesh

Galvanized Corrosion Resistance Fence Welded Wire Mesh

Welded wire mesh

Welded wire mesh is built with two orthogonal wires that are joined jointly at their intersections utilizing a resistance welding process to sort a grid. The line wires of the grid are guided by way of the welder making use of a pattern board. The equipment drops cross wires into area and fuses them collectively to generate the two distinct planes that type welded wire mesh.

Line wires (also referred to as long wires) are laid out on a pattern board to established the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped one at a time on to the line wires. Then, the cross wires are resistance welded into spot environment the panel length spacing. The panel developments soon after the weld and the method begins over yet again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the middle of two wires (Heart to Centre) or by measuring the opening between two wires (Clear Opening). We can manufacture normal and customized welded wire mesh with a square mesh spacing selection from 1″ to as huge as may possibly be necessary.  Rectangular mesh spacing ranges from one/2″ x up to as lengthy as may possibly be needed.

Edge Problems
 Welded Wire Mesh has two common edge circumstances: trimmed and untrimmed.

Element specification:
Substance: reduced carbon steel wire, galvanized wire ,stainless steel wire
Surface working : black welded wire mesh,
electro galvanized prior to welded wire mesh,
Electro galvanized after welded wire mesh
hot-dipped galvanized before welded wire mesh
Scorching-dipped galvanized right after welding wire mesh
PVC-coated welded wire mesh
Electricity coated welded wire mesh
Wire diameter: .45mm to 12.0mm
Gap dimensions: one/3″ to a hundred and fifty mm hole
Hole form: sq. hole, rectangular hole
Width: .3M to 2.0M
Packing : in roll or in panel

you should note, we can weave speical wire diameter welded wire mesh this sort of as one/4″X1.1mm, one/2″X1.4mm and so on on your requirement 

Welded wire mesh Specification:

Open in inch Opening in (mm) Wire diameter
1/four” x one/four”
6.4mm x six.4mm
three/eight” x 3/eight”
ten.6mm x ten.6mm
one/two” x one/2″
12.7mm x twelve.7mm
five/eight” x five/eight”
16mm x 16mm
3/four” x three/4″
19.1mm x 19.1mm
one” x 1/2″
twenty five.4mm x twelve.7mm
1-one/two” x one-one/2″
38mm x 38mm
1″ x 2″
25.4mm x fifty.8mm
2″ x 2″
fifty.8mm x 50.8mm
2″ x three”
50mm x 75mm
three” x three”
75mm x 75mm
two” x 4″
50mm x 100mm
two.11mm,two.5mm, 3.0mm, 4.0mm
four” x 4″
100mm x 100mm
two.0mm,2.5mm, 3.0mm, 4.0mm
CZPT Observe:
one,CZPT roll length:twenty- 30mwidth: .5m to one.8m
two,Specific measurements CZPT at ask for
3,Packing: in watertight paper in rolls. CZPT packing CZPT at ask for.


Galvanized Corrosion Resistance Fence Welded Wire Mesh


Cast Chain

As one of the cast chain manufacturers, suppliers, and exporters of mechanical products, We offer cast chains and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of cast chains.

Recent Posts